| ITEM | NAME/DESCRIPTION | PART NO. | BRAND |
| 19802 | BOLT (4.75 in. long-location “B”) | 1A5964 | Caterpillar |
| 19803 | WASHER | 1A6240 | Caterpillar |
| 19804 | BOLT–NEUTRAL CONNECTION | 1A6306 | Caterpillar |
| 19805 | BALL-STEERING CLUTCH RELEASE YOKE | 1A7657 | Caterpillar |
| 19806 | BOLT, HEX, HD., 3/4″-10 N.C. x 2 1/2″ | 1A8063 | Caterpillar |
| 19807 | NUT,PLAIN,HEXAGON GOVERNOR AND DECELERATOR CONTROL | 1A8285 | Caterpillar |
| 19808 | BOLT CLUTCH ASSEMBLY TO BRACKET (FAN SUPPORT) | 1A8537 | Caterpillar |
| 19809 | GASKET-SUPPORT TO CYL BLK (FRONT) | 1A9066 | Caterpillar |
| 19810 | CLEVIS,ROD END GOVERNOR AND DECELERATOR CONTROL | 1A9252 | Caterpillar |
| 19811 | CAPSCREW (5/16 – 18 NC X 1 1/2 GD5, HEX) | 1A9579 | Caterpillar |
| 19812 | Hydraulic relief valve | 1AXP1623 | Caterpillar |
| 19813 | BOLT COUPLING TO SHAFTS | 1B0581 | Caterpillar |
| 19814 | ROLLER-LIFT PAWL | 1B0618 | Caterpillar |
| 19815 | PIN,STRAIGHT,HEADED GOVERNOR AND DECELERATOR CONTROL | 1B0676 | Caterpillar |
| 19816 | SEAL-LIP TYPE | 1B0936 | Caterpillar |
| 19817 | WASHER (13.5X50.8X11.1-MM THK) | 1B1067 | Caterpillar |
| 19818 | SEAL | 1B1069 | Caterpillar |
| 19819 | CLAMP-HOSE (SMALL) | 1B1169 | Caterpillar |
| 19820 | SEAL | 1B2245 | Caterpillar |
| 19821 | NUT,PLAIN,HEXAGON ROD TO LEVER UOC:BSV,BSX | 1B2578 | Caterpillar |
| 19822 | BOLT,MACHINE GOVERNOR AND DECELERATOR CONTROL | 1B2713 | Caterpillar |
| 19823 | BOLT (5/16-18X1.375-INRH FRONT COVER) | 1B2790 | Caterpillar |
| 19824 | BOLT-BRACKET ASSEMBLY TO TIMING GEAR | 1B2886 | Caterpillar |
| 19825 | CLIP TUBE TO DIESEL FUEL PUMP HOUSING | 1B3057 | Caterpillar |
| 19826 | BALL BEARING | 1B3867 | Caterpillar |
| 19827 | 1b3867x | Caterpillar | |
| 19828 | CONE-ROLLER BEARING | 1B3897 | Caterpillar |
| 19829 | CONE-BEARING | 1B3908 | Caterpillar |
| 19830 | CUP-ROLLER BEARING | 1B3909 | Caterpillar |
| 19831 | CUP-ROLLER BEARING | 1B3925 | Caterpillar |
| 19832 | CUP-ROLLER BEARING | 1B3931 | Caterpillar |
| 19833 | CUP-ROLLER BEARING | 1B3934 | Caterpillar |
| 19834 | CONE-ROLLER BEARING (38.1 MM ID) | 1B3953 | Caterpillar |
| 19835 | CUP,TAPERED ROLLER (TIMKEN 3720) UOC:BSU,BSW | 1B3978 | Caterpillar |
| 19836 | CONE-ROLLER BEARING | 1B3980 | Caterpillar |
| 19837 | CONE-ROLLER BEARING | 1B4034 | Caterpillar |
| 19838 | CUP-ROLLER BEARING | 1B4038 | Caterpillar |
| 19839 | CONE-ROLLER BEARING | 1B4043 | Caterpillar |
| 19840 | CONE-BEARING | 1B4046 | Caterpillar |
| 19841 | BEARING | 1B4107 | Caterpillar |
| 19842 | BEARING | 1B4108 | Caterpillar |
| 19843 | BEARING | 1B4113 | Caterpillar |
| 19844 | BALL BEARING | 1B4117 | Caterpillar |
| 19845 | NUT (.3125″ DIAMETER) (NUT– GENERATOR LINE LEADS) | 1B4202 | Caterpillar |
| 19846 | NUT EXHAUST PIPE TO STARTING ENGINE CYLINDER BLOCK | 1B4203 | Caterpillar |
| 19847 | NUT–AIR CHAMBER MOUNTING (NUT- AIR CHAMBER ASSEMBLY) | 1B4206 | Caterpillar |
| 19848 | WASHER (25/64 X 5/8 X .064IN THK) | 1B4218 | Caterpillar |
| 19849 | NUT– FLAME ARRESTOR OR ADAPTER TO PIPE ASSEMBLY | 1B4330 | Caterpillar |
| 19850 | NUT-ROPS MOUNTING BRACKET TO FENDER REAR | 1B4331 | Caterpillar |
| 19851 | NUT-FULL (7/8-9-THD) | 1B4332 | Caterpillar |
| 19852 | NUT–GENERATOR TO SUPPORT ASSEMBLY | 1B4333 | Caterpillar |
| 19853 | NUT-FULL (1-1/4-7-THD) | 1B4334 | Caterpillar |
| 19854 | BOLT, HEX. HD., 5/8″-11 N.C. X 3″ | 1B4367 | Caterpillar |
| 19855 | NUT 7.938 mm(.312 in.) thick | 1B4430 | Caterpillar |
| 19856 | NUT | 1B4433 | Caterpillar |
| 19857 | NUT-SLOTTED | 1B4445 | Caterpillar |
| 19858 | PLUG,PIPE BASE ASSY,ENGINE OIL FILTER ASSY | 1B5174 | Caterpillar |
| 19859 | NUT-FULL (5/16-18-THD) | 1B5354 | Caterpillar |
| 19860 | NUT,PLAIN,HEXAGON TURBOCHARGER MOUNTING | 1B5355 | Caterpillar |
| 19861 | NUT-FULL (19.05MM.75INO.D.) | 1B5357 | Caterpillar |
| 19862 | NUT-FULL (5/8-11-THD) | 1B5358 | Caterpillar |
| 19863 | BALL BEARING | 1B5387 | Caterpillar |
| 19864 | BALL BEARING (85 MM OD) | 1B5675 | Caterpillar |
| 19865 | CONE-ROLLER BEARING | 1B6572 | Caterpillar |
| 19866 | CUP-ROLLER BEARING | 1B6573 | Caterpillar |
| 19867 | BUSHING-LEVER | 1B6726 | Caterpillar |
| 19868 | PIN | 1B676 | Caterpillar |
| 19869 | BOLT (1.25 in. long x .313 in. dia.) | 1B7182 | Caterpillar |
| 19870 | BOLT (5/8-18X5.75-IN) | 1B7538 | Caterpillar |
| 19871 | BOLT– HEAD TO CYLINDER BLOCK | 1B7709 | Caterpillar |
| 19872 | CLIP–CABLE TO FLYWHEEL HOUSING | 1B8471 | Caterpillar |
| 19873 | KEY-WOODRUFF | 1B8701 | Caterpillar |
| 19874 | KEY– ADAPTER TO COMPRESSION RELEASE SHAFT | 1B8702 | Caterpillar |
| 19875 | KEY,WOODRUFF GOVERNOR AND DECELERATOR CONTROL | 1B8704 | Caterpillar |
| 19876 | KEY (WOODRUFF) | 1B8705 | Caterpillar |
| 19877 | KEY-WOODRUFF | 1B8706 | Caterpillar |
| 19878 | KEY-WOODRUFF | 1B8708 | Caterpillar |
| 19879 | KEY-WOODRUFF | 1B8714 | Caterpillar |
| 19880 | KEY-WOODRUFF | 1B8724 | Caterpillar |
| 19881 | KEY-WOODRUFF | 1B8736 | Caterpillar |
| 19882 | MOON KEY MISSING | 1B-8736-2 | Caterpillar |
| 19883 | KEY-WOODRUFF | 1B8744 | Caterpillar |
| 19884 | KEY-WOODRUFF | 1B8745 | Caterpillar |
